ACS LACING ANCHORS, QUILTING PINS, SELF-LOCKING SPEED WASHERS, AND MISCELLANEOUS ACCESSORIES

Manufactured to meet or exceed industry standards and are produced out of certified 304 Stainless Steel.

High strength combined with easy assembly. Provides secure attachment and protection of the insulation blanket. Excellent for high temperatures in both exterior and interior applications.

Descriptions:

Lacing Anchors are made of 304SS plate with a machined stamped hook and 12 or 14 gauge annealed wire nail in varying lengths through the center.

The Quilting Pins are made of 304SS round plates and a 12 or 14 gauge annealed wire nail in varying lengths through the center,
The speed washers are made of round 304SS plate in various sizes with a 12 or 14 gauge friction fit hole stamped out in the middle.
Other accessories include 304SS 1” two hole washer, the one and two hole nailless 304SS Lacing Hook and the 1⁄2” zinc plated 12 gauge Lacing Ring.

Uses:

The primary applications of the Lacing Anchors are for securing and attaching removable and reusable insulation blankets around the objects that they are insulating. The nail of the Lacing Anchor is pushed through the front side of the blanket so the Lacing Anchor head is snug against the pad with the nail extending out the back side.

The Self-Locking Washers are pushed down over the nail until the blanket is snuggly sandwiched between the washer and the Lacing Anchor head or Quilting Pin head.

The Quilting pins are designed to secure the insulation inside the blanket in its place. It is important that the insulation inside the blanket doesn’t settle down or slide around inside and create openings in the insulating envelope created by the removable and reusable blanket. The Quilting Pin is in the same manner as the Lacing Anchors.

Dimensions:

The Lacing Anchors are 0.040” 304SS plates with a machine stamped hook and 12 or 14 gauge annealed wire nail impaled in the center of the plate. The Lacing Anchors are stocked with nail lengths of 1 1⁄2”, 2 1⁄2”, 4 1⁄2” and 6 1⁄2”. Special lengths are available on request.

The Quilting Pins are 0.015” 304SS plates. 1 3/16” round plate with the same 12 or 14 gauge annealed wire nails impaled in the center of the plate. The plate is then cupped slightly around the edge. The lengths of the nails are the same as for the Lacing Anchors.

The Self-Locking Speed Washers are 0.015” 304SS round plate that come in 1”, 1 3/16” and 1 1⁄2” diameters. They have a 12 or 14 gauge friction fit hole stamped out in the middle.

The other accesories include a 0.024” 304SS 1” Two Hole Washer, a One Hole Lacing Hook and a two Hole Lacing Hook made of 0.040” 304SS and a 1⁄2” Zinc Plated 12 gauge Lacing Ring,