ACS INSULATION ANCHORS, QUILTING PINS, SELF-LOCKING SPEED WASHERS, & MISCELLANEOUS ACCESSORIES


Description:
Our Insulation Lacing Anchors, Quilting Pins, Self-Locking Speed Washers and other accessories combine high strength with easy assembly. Used for securing attachment and protection of the insulation blanket, our products are manufactured for high temperatures in both exterior and interior applications.

Uses and Dimensions:
Lacing Anchors
At ACS, our Insulation Anchors are for attaching and securing removable and reusable insulation blankets. For best results, the nail of the Insulation Anchors should be pushed through the front side of the blanket so the Insulation Anchor head is snug against the pad with the nail extending out the back side.
We offer our Insulation Anchors in the following dimensions:
  • 0.040” 304SS plates with a machine stamped hook
  • 12 or 14-gauge annealed wire nail impaled in the center of the plate nail
  • Nail lengths of 1 1⁄2”, 2 1⁄2”, 4 1⁄2” and 6 1⁄2” (special lengths are available on request)
Quilting Pins
Designed in the same pattern as the Insulation Lacing Anchors, our Quilting Pins are made to secure the insulation inside the blanket in its place. This is to ensure that the insulation inside the blanket doesn’t settle down or slide around inside and create openings in the insulating envelope created by the removable and reusable blanket.
We offer our Quilting Pins in the following dimensions:
  • 0.015” 304SS plates
  • 1 3/16” round plate
  • 12 or 14-gauge annealed wire nails impaled in the center of the plate
  • Nail lengths of 1 1⁄2”, 2 1⁄2”, 4 1⁄2” and 6 1⁄2” (special lengths are available on request)
Self-Locking Speed Washers
Designed to complement both our Insulation Anchors and Washers, our Self-Locking Washers are pushed down over the nail until the blanket is snuggly sandwiched between the washer and either the Lacing Anchor head or Quilting Pin head.
We offer our Speed Washers in the following dimensions:
  • 0.015” 304SS round plate
  • 1”, 1 3/16” and 1 1⁄2” diameters
  • 12 or 14-gauge friction fit hole stamped out in the middle
Other Accessories
In addition to our above products, we also offer the following complementary accessories:
  • 0.024” 304SS 1” two-hole Washer
  • 0.040” 304SS one-hole Lacing Hook and a two-hole Lacing Hook
  • 1⁄2” Zinc Plated 12-gauge Lacing Ring

Contact ACS Industries About Your Insulation Anchors and Accessories Needs

The experienced team at ACS Industries can help you choose the right insulation anchors and other accessories for your specific application. Fill out the contact form below or reach out today and we will be in touch shortly. We look forward to learning more about your unique requirements.